Velux and skylight repairs in Paulsgrove. Paulsgrove estate loft conversions are less common than in Victorian stock areas — the post-war semi roof pitches are shallower, which affects Velux placement and flashing specification. Coastal-grade flashings as standard.
Tell us the job in 30 seconds. No pushy sales, no call-out fee.
📞 Call Now: 0239 307 1334Common Velux failures in Paulsgrove include flashing kit corrosion from salt air, failed dome seals and condensation between panes. We carry parts for the most common Velux sizes.
Standard zinc Velux flashing kits are rated for inland use. For Paulsgrove we specify copper or coastal-grade equivalents on all new installations and replacements. Standard zinc corrodes too fast here.
We install new Velux windows as part of loft conversion roofing work across Paulsgrove. Structural assessment, coastal-grade flashing and building regulations compliance certificate provided.
Paulsgrove estate loft conversions are less common than in Victorian stock areas — the post-war semi roof pitches are shallower, which affects Velux placement and flashing specification. Common Velux failures in Paulsgrove include flashing kit corrosion from salt air, failed dome seals on older units, and condensation between panes indicating failed sealed units. We carry parts for the most common Velux sizes and can carry out same-day repairs on most units.
Standard Velux flashing kits are rated for inland use. For Paulsgrove properties we specify the BDX copper flashing kit or equivalent coastal-grade alternative on new installations and replacements — the salt air environment in this area will corrode standard zinc flashing significantly faster than the inland design life assumes.
We install new Velux windows as part of loft conversion roofing work across Paulsgrove. Full structural assessment, correct flashing specification for coastal conditions, and building regulations compliance certificate provided on completion.
| Service | Cost Guide | Notes |
|---|---|---|
| Velux flashing replacement | £150–£350 | Coastal-grade kit |
| Sealed unit replacement | £200–£400 | Double or triple glazed |
| New Velux installation | £400–£700 | Including structural cut |
| Full frame replacement | £600–£1,000 | Including coastal flashing |
"Full nail sickness assessment and re-fix on our Paulsgrove estate property — both main slopes. Portsmouth Roofing was honest about the scale of the issue and prioritised the slopes by risk. Stainless fixings throughout."
"Flat roof garage on the Paulsgrove estate — original felt from the estate build in the 60s. GRP installed in a day. First dry garage we've had."
"Storm damage — lost a dozen tiles from the rear slope after high winds. Emergency response within 90 minutes, cleared the roof, made safe and returned next day for full repair."
A flat roof problem usually shows as a damp patch on the ceiling below, ponding water that never drains, or a felt surface that has blistered, split or lifted at the edges.
When it is not the answer: If the deck is sound and only a seam has failed, a targeted repair may hold rather than a full re-cover Read the full guide.
Elevated ridge position takes Meon Valley winds from the north and west — the worst verge and ridge exposure in the area. Paulsgrove's post-war estate roofs sit on an exposed chalk ridge — open access but severe wind exposure dictating mechanical fixing. It is why we specify marine-grade fixings and correct lead codes as standard on Paulsgrove roofs — the coastal environment punishes anything less.
We assess the covering and, critically, the deck condition underneath — the biggest cost variable on a Portsmouth flat roof.
An itemised quote specifying the system — GRP, EPDM or felt — and any deck replacement, priced upfront.
We book the work and arrange access; most flat roofs are a one to three day job.
Strip, assess and replace any rotten deck, then lay the chosen coastal-grade membrane with proper upstands and drainage falls.
Site cleared, waste removed, and your 10-year workmanship guarantee issued alongside the membrane manufacturer warranty.
| Job | Typical duration |
|---|---|
| Small flat roof / porch | 1 day |
| Garage-sized GRP or EPDM | 1–2 days |
| Large or multi-level flat roof | 2–4 days |
| Deck replacement (add-on) | +1 day |
| Dormer flat roof | 1–2 days |
GRP needs dry, workable temperatures to cure — we schedule around the forecast and never lay over a damp deck.
Most flat roofs work from towers or a small scaffold; access is straightforward on single-storey extensions and garages. Scaffold is specified for: first-floor and above flat roofs, or where edge protection is needed for safe working - always itemised in your written quote, never a hidden extra, and we arrange it.
Paulsgrove's post-war estate roofs sit on an exposed chalk ridge — open access but severe wind exposure dictating mechanical fixing. Pavement scaffold and skip permits go through Portsmouth City Council; allow a few working days on streets like Marsden Road, Allaway Avenue, Cheltenham Road where space is tight.
| Job | Typical range | Notes |
|---|---|---|
| Slipped or cracked tiles | £150–£350 | Per visit incl. access |
| Leak diagnosis & repair | £150–£500 | Depends on water travel |
| Chimney flashing | £200–£600 | Code 5–6 lead |
| Valley repair | £400–£900 | Strip and re-lay |
| Nail-sickness re-fix (per slope) | £600–£1,200 | Estate stock |
Worked example: A typical job on a property off Marsden Road in Paulsgrove, including access and waste removal, sits in the middle of the ranges above once surveyed.
No deposit on repairs under £500. Staged payments on re-roofs — nothing up front before materials are on site. All prices include VAT; written itemised quote before any work.
Covering PO6 and surrounding postcodes.
The flat roof carries a 10-year workmanship guarantee; GRP and EPDM membranes carry manufacturer warranties of 20–25 years on top.
If a fault appears in covered work, we come back and put it right. No quibbling, no re-charge.
One to three days of work over a single roof area, minimal internal disruption — we protect the space below and clear all waste. You do not need to stay home for external work - we just need power and access agreed in advance.
EPDM can be laid in most conditions; GRP needs dry weather to cure properly, which we plan around Portsmouth's coastal forecast. Elevated ridge position takes Meon Valley winds from the north and west — the worst verge and ridge exposure in the area.
Yes — Paulsgrove is within our core service area. Call 0239 307 1334 for availability and free quote.
Yes — free, no-obligation survey and written quote before any work starts. No call-out fee.
Yes. NFRC registration, full public liability insurance and 10-year written guarantee on all work.
Most jobs are surveyed within 48 hours and started within 1–2 weeks. Emergency work is available same day — call 0239 307 1334.
The most common cause is failed flashing — either the original zinc has corroded or the seal between flashing and tile has failed. Less commonly, the dome seal has failed or the frame has warped. We diagnose the actual cause before quoting a fix.
Yes — standard zinc flashings corrode faster in Paulsgrove's salt air. We specify copper or coastal-grade alternatives on all new installations.
Yes — we work on Velux, Fakro, Keylite and other brands. We carry parts for the most common sizes.
No call-out fees. No obligation. Local Portsmouth roofers covering this area.
0239 307 1334